125W Dual Output AC DC LED Power Supply Switching Mode RD-125 Series RD-125 Dual Output Switching Power Supply manufacturer from China Shenzhen Riyueguanghua Technology Co., Limited.

125W Dual Output AC DC LED Power Supply Switching Mode RD-125 Series

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: RD-125 Dual Output Switchin...

125W Dual Output AC DC LED Power Supply Switching Mode RD-125 Series

125W Dual Output AC DC LED Power Supply Switching Mode RD-125 Series

G3 Series RD-125 Enclosed Switching Power Supply Features:

1. Protections: Short circuit / Overload / Over voltage
2. Cooling by free air convection
3. LED indicator for power on
4. 100% full load burn-in test
5. All using 105 celsius long life electrolytic capacitors
6. Withstand 300VAC surge input for 5 second
7. High operating temperature up to 70 celsius
8. Withstand 5G vibration test
9. High efficiency, long life and high reliability
10. 3 years warranty

Meanwell G3 Series AC to DC Switching Power Supplies:

RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150

RD-35 / RD-50 / RD-65 / RD-85 / RD-125

RID-50 / RID-65 / RID-85 / RID-125, RT-50 / RT-65 / RT-85 / RT-125

RQ-50 / RQ-65 / RQ-85 / RQ-125

Quick Details:

125W - Dual Output
Model No.	Output	Tol.	R&N	Effi.
RD-125A	5V, 2.0~15A 12V, 0.5~10A	±5% ±7%	80mV 120mV	82%
RD-125B	5V, 2.0~10A 24V, 0.4~5.0A	±5% ±7%	80mV 120mV	86%

General Specifications:

Model No.	RS-150 RD / RID / RT / RQ-125
AC input voltage range	115 / 230VAC by switch
AC inrush current (max.)	40A at 230VAC
DC adjustment range	±10% by potentiometer for single output; CH1 -5%~+10% by potentiometer for multiple output
Overload protection	110%~150% hiccup mode, auto-recovery (150% ~190% for RID-125-1205/2405)
Over voltage protection	115%~135% rated output voltage, hiccup mode, auto-recovery
Withstand voltage	I/P - O/P: 3kVAC, I/P - FG: 1.5kVAC, O/P - FG: 0.5kVAC, 1 minute
Working temperature	-25~+70°C (refer to the derating curve for different models)
Vibration	10~500Hz, 5G 10min. /1 cycle, period for 60 min. each along X, Y, Z axes
Safety standards	UL60950-1, TUV EN60950-1 approved
EMC standards	EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2) (35~150W)
Connection	Terminal block for input and output
Dimension (LxWxH)(mm)	199x 98x 38
Case No.	902A
Packing	20pcs /15kg

NOTE:

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 celsius of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
6. Each output can work within current range. But total output power can't exceed rated output power.
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.

DATASHEET: