LED Power Supply Constant Current APC Series 20w LED Driver APC-25-700 APC-25 Single Output LED Power Supply manufacturer from China Shenzhen Riyueguanghua Technology Co., Limited.

LED Power Supply Constant Current APC Series 20w LED Driver APC-25-700

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: APC-25 Single Output LED Po...

LED Power Supply Constant Current APC Series 20w LED Driver APC-25-700

LED Power Supply Constant Current APC Series 20w LED Driver APC-25-700

AP Series Features (12-35w Single Output LED Power Supply):

1. Universal AC input / Full range
2. Fully isolated plastic case
3. Protections: Short circuit / Overload (APV only) / Over voltage
Constant voltage mode for APV series
Constant current mode for APC series
4. IP30 design
5. Withstand 300VAC surge input for 5 seconds (APV/C-25/35)

6. Class 2 power unit / Pass LPS (except for APC-25-350 & APC-35-350/500)
7. Isolation class II, no F.G.
8. Cooling by free air convection
9. 2100% full load burn-in test
10. Low cost, high reliability
11. Suitable for LED lighting and moving sign applications
12. 2 years warranty

APC-25 25W Single Output Switching Power Supply Features:

1. Constant current mode power supply
2. Universal AC input / Full range
3. Withstand 300VAC Surge input for 5 seconds
4. Protections:Short circuit / Over voltage
5. Fully isolated plastic case
6. Small and compact size
7. Cooling by free air convection
8. IP30 design
9. 100% full load burn-in test
10. Suitable for LED lighting and moving sign applications
11. Low cost / High reliability
12. 2 years warranty

AP Series Power Supplies:

APV Series:
Single Output LED Power Supply: APV-12 Series, APV-16 Series, APV-25 Series, APV-35 Series

APC Series:
Single Output LED Power Supply: APC-12 Series, APC-16 Series, APC-25 Series, APC-35 Series

Quick Details of APC-25 25W Single Output LED Power Supply:

APC-25 Series (C.C. mode)
Model No.	Output	Io Tol.	R&N	Effi.
APC-25-350	25~70V, 350mA	±8%	300mV	83%
APC-25-500	15~50V, 500mA	±8%	300mV	83%
APC-25-700	11~36V, 700mA	±8%	300mV	83%
APC-25-1050	9~24V, 1050mA	±8%	300mV	83%

Specifications of AP-25:

Model No.		APC-25/35
AC input voltage range		90~264VAC ; 127~370VDC
AC inrush current (max.)		Cold start, 45A at 230VAC
Over voltage protection		110%~145% rated output voltage
Withstand voltage		I/P-O/P: 3kVAC
Working temperature		-30~+70celsius (refer to output derating curve)
Vibration		10~500Hz, 2G 10 minutes /1 cycle, period for 60 minutes each along X, Y, Z axes
Safety standards		UL8750 approved (except for APC-25-350&APC-35-350/500); Design refer to TUV EN60950-1
EMC standards		EN55022 class B, EN61000-3-2 class A, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11
Connection	Input	UL rated, 18AWGx2C (15cm)
	Output	UL rated, 18AWGx2C (15cm)
Dimension (LxWxH)(mm)		84x 57x 29.5

NOTE:

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristic for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6.The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.

APC-25 Series Datasheet: